1. Equipment overview

• Equipment type: Fully automatic, separate, with priority to STAT model
• Speed ​​:
  • 400 Test / h for biochemical analysis.
  • 600 tests / h with ISE only (optional)
• Measuring Principle: Colorimetry, turbidimetry, ISE
• Methods of analysis:
  • End point, kinetics, fixed time, …
  • Support single / double wavelength and 1-2 sample multi reagent, linear and non-linear standard.
• Simultaneous analysis samples: 88 colorimetric samples and 3 ISE samples (optional K, Na, Cl)

2. Sample location:

• – Sample position: 115 sample positions, including: 50 routine sample positions, 20 STAT positions, 34 standard positions, 8 QC positions, 3 washing chemical positions. Continuously cool the standard position and QC position to keep the temperature from 5 ~ 15˚ C within 24 hours
• Sample cuvette: standard cup, original (blood) sample tube, tubes with different sizes (Ø12 ~ 16) mm × (25 ~ 100) mm
• Sample barcode: 12of5 、 code128 、 code39 、 UPC / EAN 、 code93
• Sample volume: 2µl-35µl, 0.1µl stepping.
• Sampling technology: Detects liquid level, detects clogging and prevents shock
• Cross contamination rate: Automatically wash with hot water, carry rate ≤0.1%
• Automatic sample phase: 3 ~ 170 times

3. Reagent location

• Suction needle (probe): 2, with liquid level detection and shock resistance function
• Reagent volume: 20µl-350µl, 1 µl stepping.
• Reagent location: Double reagent dish, 45×2, continuously cooled from 5 ~ 15˚C within 24 hours, used for chemical bottles of standard capacity of 70ml, 20ml.
• Reagent barcode: Code 128
• Cross-contamination rate: Automatically wash with hot water, cross-contamination rate ≤0.1%

4. Reaction location

• Reaction Cuvvet: 120 positions of plastic optical cuvette holes, optical diameter 6mm
• Total reaction volume: 150µl-450µl
• Reaction temperature: 37˚C, ± 0.1˚C
• Stable temperature of reaction plate: Circulating water
• Mixing needle: 2, mix after smoking reagent.
• Wash reaction cuveete: 7 washing stations with 11 steps, cleaned with warm water
• Wastewater treatment :
  • There are two levels of flow with low and high concentration of wastewater.
  • There is a concentrated wastewater warning.

5. Optical system

• Light source: Halogen lamp: 20W / 12V. Lifespan is about 2000 hours
• Monochromator: Grating photometry
• Photoelectron road: Rear spectrophotometry
• Wavelengths: 340nm, 380nm, 405nm, 450nm, 480nm, 505nm, 546nm, 570nm, 600nm, 660nm, 700nm, 800nm.
• Detector: LED bipolar
• OD linear range: 0 ~ 3.3 Abs

6. Standards and QC

• Standard method: 1 point, 2 point, multipoint, and pointless linearity method.
• QC method: QC in real time, QC one at a time and monthly.
• Handling samples out of control: The sample is alerted when out of control, with the cause recorded.

7. Operating system

• Operating System: Windows XP
• Analysis software: Use graphic software in English
• Main functions of the software: Automatic calibration, automatic barcode scanning, test sample checking, management of reagent information, serum index, monitoring of the entire reaction process, preventing contamination, prevent possible cross-contamination, manage patient information, report and print results,….
• PC configuration:
  • CPU ≥ 2.2 GHz (dual-core processor), memory ≥ 1G, hard disk ≥ 160 G.
  • 17 inch LCD display, laser printer, inkjet, inkjet (optional)
• System connection: Connect via TCP / IP, RS-232C

8. Other information

• Dimensions: 1060 mm x 790 mm x 1150 mm
• Weight: 300 kg.
• Power source: Voltage 220V ± 22V, 50Hz ± 1Hz, power source 2KVA.