1. Equipment overview

• Equipment type: Fully automatic, separate, with priority for STAT model
• Flux :
  • 400 Test / h for biochemical analysis.
  • 800 test / h with ISE only (optional)
• Measuring Principle: Colorimetry, turbidimetry, ISE
• Analysis method:
  • Endpoint, kinetics, fixed time etc.,
  • Single / double wavelength
• Simultaneous analysis samples: 110 colorimetric samples and 3 ISE samples (optional k, Na, CL)

2. Sample location

• Sample position: 115 sample positions
• Sample volume: 1.5µl ~ 35µl, 0.1µl stepping
• Sample Cuvette: Standard cup, original (blood) sample tube, tubes with different sizes (Ø10 ~ 13) mm x (75 ~ 100) mm
• Sample barcode: code 128, code 39, code 93, l2of5, UPC / EAN
• Sampling technology: Detects liquid ink and resists.

3. Reagent location

• Suction needle (probe): 1, with liquid level detection and shock resistance function
• Reagent volume: 20µl-350µl, 1 µl stepping.
• Reagent position: Dual reagent tray with up to 112 positions
• Reagent barcode: code 128

4. Reaction location

• Reaction cuvvet: 120 plastic optical cuvette hole positions
• Total reaction volume: 120µl-450µl
• Reaction temperature: 37˚C, ± 0.1˚C
• Stable temperature of the reaction plate: Circulating water
• Mixing needle: mix well after smoking reagent.
• Reaction cuvvet washing: 7 washing stations with 11 steps, cleaned with warm water
• Waste treatment :
  • There are two levels of flow with low and high concentration of wastewater.
  • There is a concentrated wastewater warning.

5. Optical system

• Light source: Halogen lamp: 20W / 12V.
• Monochromator: Grating photometry
• Photoelectron road: Rear spectrophotometry
• Wavelength: 340nm ~ 800nm.
• Detector: Bipolar LED.
• OD linear range: 0 ~ 3.6 Abs

6. Standards and QC.

• Calibration method: 1-point, 2-point, multi-point, and zero-point linearity method.
• QC method: real-time QC, one-by-one and monthly QC.
• Handling samples out of control: The test piece is alerted when out of control, with the cause recorded.

7. Operating system

• Operating System: Windows 7 / Windows 10
• Analysis software: Using graphic software in English
• Report Print: Report formats support QC mode viewer and status information, etc.
• System connection: RJ45 network interface.

8. Other information

• Dimensions: 1060 mm x 790 mm x 1150 mm.
• Weight: 300 kg.
• Power supply: Voltage 220V ± 22V, 50Hz ± 1Hz, power source 2000VA.